(一)画册印刷印前准备
（1） Prepress preparation for album printing
I.掌握画册印刷工艺要求
1. Master the printing process requirements of picture album
(1)熟悉标准样本(货样)。包括样本的色彩状况，图像的主要特征及主要技术要求。
(1) Familiar with standard sample. Including the color status of the sample, the main characteristics of the image and the main technical requirements.
(2)审核印刷色序，如有不妥应提出修改意见。
(2) Review the printing color sequence, if there is something wrong, put forward suggestions for modification.
(3)了解承印材料的主要性能特点。
(3) Understand the main performance characteristics of printing materials.
(4)掌握所用油墨、溶剂的主要性能。
(4) Master the main performance of ink and solvent.
(5)版面设计、尺寸大小、位置关系、套准精度及印刷压力要求。
(5) Layout design, size, position relationship, registration accuracy and printing pressure requirements.
2.准备工作检查
2. Preparation check
·单张印刷印版检查。各色版有无损伤，印版尺寸是否符合要求。
·Sheet printing plate inspection. Whether the color plate is damaged, and whether the plate size meets the requirements.
·印版滚筒检查。各色印版滚筒的标志是否清晰，测量各印版滚筒的周长以选择滚筒齿轮。
·Plate cylinder inspection. Whether the mark of each color plate cylinder is clear, measure the circumference of each plate cylinder to select the cylinder gear.
·检查轴承质量。轴承间隙必须在规定范围内，轴承表面清洁并加润滑油。
·Check the bearing quality. The bearing clearance must be within the specified range, and the bearing surface must be clean and lubricated.
·承印材料、油墨、助剂等质量检查。
·Quality inspection of printing materials, inks, auxiliaries, etc.
3.印刷机的清理与检查
3. Cleaning and inspection of printing press
当印刷机刚印完一批活件后还未完全清理干净时应对设备进行清理检查，主要部位如下:
When the printing machine has just finished printing a batch of live parts and has not been completely cleaned up, the equipment shall be cleaned and inspected. The main parts are as follows:
A.取下卷筒料轴，检查其有无破损。
A. Remove the reel shaft and check whether it is damaged.
B.清理墨盘、墨斗中的油墨。
B. Clean the ink in the ink tray and ink bucket.
C.清洗墨泵和软管。
C. Clean the ink pump and hose.
D.清洗墨辊。
D. Clean the ink roller.
E.清洗印版滚简和网纹辊。
E. Cleaning plate barrel and anilox roller.
济南金鼎
